How To Fit A Concealed Shower Head

A concealed Shower head is a modern design choice that hides pipework inside the wall or ceiling, leaving only the sleek shower face visible. Installing it correctly not only enhances the bathroom’s aesthetics but also ensures long-term durability and smooth water flow.

Tools and Materials Required

• Concealed shower head and arm

• Drill and hole saw

• Adjustable wrench

• Pipe cutter and PTFE tape

• Spirit level and measuring tape

• Wall fixings, rawl plugs, and screws

• Safety gloves and goggles

Step 1: Plan the Position

1. Decide the location – Concealed shower heads can be wall-mounted or ceiling-mounted. Choose based on your bathroom design and comfort.

2. Height considerations – Standard height for wall-mounted is around 2000mm from the floor, while ceiling-mounted depends on ceiling height.

3. Check water supply – Ensure hot and cold pipes are positioned and ready for connection.

Step 2: Prepare the Wall or Ceiling Opening

1. Mark the fitting point for the shower arm or pipe outlet.

2. Use a hole saw to cut the correct-sized opening.

3. Confirm that the recess depth matches the specification of the concealed head to ensure a flush finish.

Step 3: Install the Shower Arm or Connection

1. Fix the shower arm or ceiling connection securely to the hidden pipework.

2. Use PTFE tape on threaded connections to prevent water leakage.

3. Tighten connections carefully with a wrench without overtightening.

Step 4: Fit the Concealed Shower Head

1. Attach the shower head to the fixed shower arm or ceiling connector.

2. Align the head using a spirit level so it sits evenly.

3. Ensure all joints are secure and watertight.

Step 5: Test the Water Flow

1. Turn on the water supply and check for leaks.

2. Run hot and cold water to ensure even distribution and correct temperature control.

3. If necessary, adjust the angle of the shower head for optimal coverage.

Step 6: Finish and Seal

1. Fit any backplate or decorative trim supplied by the manufacturer.

2. Apply a thin layer of waterproof silicone around the fitting area if required.

3. Clean the shower face to remove dust or debris before first use.

Safety Tips

• Always switch off the water supply before installation.

• Wear protective equipment when drilling walls or ceilings.

• Consult a professional plumber if you’re not confident with concealed pipework.

Conclusion

Fitting a concealed shower head requires careful planning, precise pipework connection, and proper sealing. When installed correctly, it offers a minimalist look, hides unsightly pipework, and delivers a spa-like showering experience. Following the above steps ensures reliable performance and a stylish finish that complements any modern bathroom.